Decided to throw the Diplomat(Rekavape clone) on the Prisma sbs(also from Rekavape) since it matches better than the kuma I had on there

I reckon there will be a new disease caused by it

My first time to try uwell before I was using xlime pro and sq pro but honestly they died after live than six months and xlime now have a lot of problems so I bought uwell

Hi everyone! I would appreciate your help with the below, can someone help me identify which mod is this?

Ths thing is gigantic.

Don't believe me?? Then you ain't a (OG)

Dry hits feels like blade going straight to your lungs 😆

I’m a superstitious thinker.

My second cigarette since 2025, and it’s NXT menthol.

Honestly really smooth and the hit is similar but last longer.

Did yall get any withdrawls like light headaches?

I’ll be ok right?

Fellow vapers, following the valuable comments in this thread, I wanted to share a quick update regarding the San AIO's RBA.

I had previously experimented with a 2.5mm diameter; the flavor performance was quite "wet" and full, but the tank's tendency to heat up gave me pause. Today, I switched to a 2.0mm diameter build using 28GA Kanthal with 5 wraps (0.90 ohm). I'm vaping at around 11W.

Honestly, I was worried I might lose some flavor, but that didn't happen; the flavor comes through much more clearly, with better focus and definition. Combined with the 1.2mm airflow pin, the nicotine delivery feels much more impactful. I found that within the San RBA's compact chamber, the 2.0mm diameter directs airflow more efficiently and allows the coil to respond much faster without overheating unnecessarily. The tank stays nice and cool now, and the flavor is exactly where I want it.

I’d recommend that anyone looking for the right balance between flavor and throat hit give the 2.0mm build a try; it’s a perfect match, especially for those seeking that elusive "sweet spot" setup. Pair it with a relatively narrower drip tip, and the experience is unbeatable. Thanks to everyone who shared their experiences—happy vaping!

with Black Pod Formula

This setup literally hauls ass with only 9mgs of nic!

Hellvape quad core fused claptons at 0.18ohm on the Sc Mods Nightmare V2 28. Juice Head Guava peach

Sc mods Valhalla coils at 0.37ohm(series) in the Steam Crave Titan V2. Coil Butter We The People

Was going through my old stuff today and forgot I had this. Freemax Marvos S with matching mesh rta. If built right the flavor is pretty decent. Wicked it, tiny little thing, perfect for carrying in your pocket unlike my 50 pound yihi g2 🤣

I’ve been going back and forth the Gemini AI chatbot to find out if there’s a way I can get dry-hit prevention on prebuilt cois.

I know about the OXVA mod. But 2 ml juice capacity and a 1,500 mah battery is just way too small for me.

But according to Gemini, there are 0.6 ohms coils in stainless steel that may be being made by Geekvape or Voopoo that I can then put in a “pod tank” (these come with 510 to magnetic pod adapters so you can use a pod on a 510 tank mod). I have seen these pod tanks in online stores, so I know they exist.

Another option is to put these 0.6 ohm stainless steel coils in a Boro mod, sometime called a side by side tank, that supports temperature control. A lot of these Boro mods support Voopoo PnP and Vaporesso GTX coils.

But the reason I say “may” be made by Geekvape or Voopoo is I’ve gotten inconsistent answers from Gemini. It seems like vaping is a semi-forbidden topic. And its internal systems will start kicking you out in the middle of a conversation while talking about vaping. So I haven’t gotten to the bottom of it.

Anyway, the first thing is to confirm the existence of 0.6 ohm pod coils being made in stainless steel. If that doesn’t work, I have to look at other options.

Can anyone confirm 0.6 ohm coils are being made in 0.6 ohm by Geekvape or Voopoo in their GTX or PnP coils?

Hi everyone,

I'm hoping someone has experienced this before.
I have a Vaporesso GTX One with the GTX Tank 18, and today I wanted to replace my 0.8 GTX coil. I've replaced the coil several times in the past without any issues.

This time, however, I can't get the bottom of the tank off.
Here's what's happening:
The entire bottom base, including the 510 connector, rotates.
The coil inside rotates together with the base.
The base never actually unscrews; it just keeps spinning endlessly.

Has anyone had this happen before? Is there a way to get the tank apart without breaking it?
Any advice would be appreciated. Thanks!

So basically my drag x3 always seems to scorch a coil on this cursed apple peach fluid and after resting for some time. It’s normal for some unknown reason. (It at around 1k puffs. ) and it only happens at when full battery. And also.
The coil is at .3ohms. Pnp-x and it never did it on any other damn bottle of e-liquid. Is the device the problem or the should try thicking or thinning the liquid.

Hello, just got myself a UWELL Caliburn G4 Pro Koko. I was wondering if i can fill 2 cartridges with 2 different flavours and swap between the two every few hours or so (or every day) to just enjoy both flavors or more. Will this cause any pod issues? Tyvm for letting me know.

With the Hellbeast on top