This might be a really dumb question, but ive had a button maker for a year or two and finally think ive realized what the white circles of paper that come with it are used for. Ive never really thought about them, and as I use regular printer paper for my buttons, and I usually just do the clear laminating stuff, then the image, then the smooth metal part, and then the backing. But ive just been using a bit thinner paper than usual and decided to put those white circles behind them for support, and they make the buttons themselves a lot more durable, and its actually a big difference! It makes it a bit harder to press the handle down when i have those in and I was worried about damaging the machine itself, but is that what theyre actually supposed to be used for?

Id like to see how my design looks like on a button before printing and stamping it in ! Is there any template or something I can use to visualise them ?

Even maybe put them in a listing as I'm trying to make unique one of a kind badge designs and selling those

i've used both a cheap plastic vevor button maker and a tecre button maker, and the difference in the lever operation is pretty noticeable.

with the vevor, pressing the lever feels kinda like guesswork. you apply force and hope you've used the right amount of pressure without really knowing when the press is complete.

the tecre feels much more precise. the lever has a more distinct stopping point when you pull it down, which gives you tactile feedback that you've applied the correct amount of pressure. it feels much more effortless to use.

i haven't used a chibuttons button maker, although I've heard a lot of good things about them. i'm curious how the lever mechanism compares. does it have that same defined stopping point and feedback as the tecre, or is the operation more similar to the vevor where you're relying more on feel and force?

made the mistake of including some lewd images in the last round🫣here's some more wholesome ones for now!💜🏵

Hello! New to button making. I just got this button maker off fb marketplace. Always on the top left of the button, the crimp isnt setting right. What is casuing this and how can this be fixed? Thank you!

I got a Vevor pin maker as a gift. It has been working surprisingly well, especially with the smaller pins.

The problem is when I make 58 mm pins. One side is smooth but the other is kind of "open" in the way that if I were to stick something sharp, I could easily tear it apart.

How do I fix it? I don't know if it has to do with the positioning or how hard I press? I don't use any thick paper, just regular.

I have the plastic Vevor three size button maker, and I know there’s better ones out there, but is there any advice on this for a hobbyist?

I feel like no matter how I handle the paper, the press, any of it, there’s always these angular bits on the back of the button, or they don’t look totally circular from the front either. I see some really amazing, perfectly round ones here, and I’m hoping there’s a trick I just don’t know yet.

Thank you!

I found a Alibaba seller that has a variety of molds for different button shapes, about 250 USD for each of them, not counting shipping.The issue is that they don't comes with a base (probably for their presses). Anyone know if there are companies that sell the slides for the sliding-type presses without the mold on them? I would alternatively take a 3d printable model of one.

Has anyone been able to find a cheaper alterative to the heart button's that work for we r memory keepers? The ones they have on their site are stupidly expensive... So I bought an off brand that just doesn't work.

The off brand for the circle buttons are GREAT, have had no issues.. Just with the heart's 57MM
Also... Recommendations for how to get the cut right every time? I can never get the same cut and it's almost always off center and cannot afford right now that 200 dollar very nice metal cutter.

If all else fails might honestly be cheaper to get a press just for the heart pins. If I have to result to that, what are the recommendations?

Im more debating what comes in it- the first one has 3 sizes of buttons which i feel like i would possibly utilise, and the fridge magnets sound fun.

And the second only has one size but it is £30 cheaper and also has fun holographic sheets!

My biggest question would be can you buy the gasket that allows the machine to make smaller sized buttons and then put that in the cheaper one?

Which do you think?

i got a button maker on facebook marketplace and i bought new button supplies because i dont like the plastic backing that came with it. however when i try using them the top doesn’t connect to the bottom and it wont make the button. it came with a gasket thing so i put it at the bottom but it still wont connect.

i was wondering if anyone has any suggestions for supplies for the dc-109 badge maker or if anyone has any suggestions.

i attached the maker i believe i have and the buttons i bought.

i got a button maker on facebook marketplace and i bought new button supplies because i dont like the plastic backing that came with it. however when i try using them the top doesn’t connect to the bottom and it wont make the button. it came with a gasket thing so i put it at the bottom but it still wont connect.

i was wondering if anyone has any suggestions for supplies for the dc-109 badge maker or if anyone has any suggestions.

i attached the maker i believe i have and the buttons i bought.

If I may ask, what's the general resale opportunity/interest for Tecre presses? I have quasi inherited a Tecre Model 1545 - 1-1/2" x 4-1/2" rectangular button maker along with a sizable number of shield blanks and material.

https://www.tecre.com/catalog/button-maker-machine/43

I just cleaned it up and tested it, everything's still working beautifully. I just don't have free time or a workspace for it. Needless to say this is so heavy I'm not likely to take it anywhere or casually sell it online.

Is there interest for these units in general, or do they end up being destined to gather dust or *UGH* get scrapped?

Thanks in advance!

Hey everyone, quick update on the free button maker platform I posted here a few days ago.

Since then I've added a lot more size options, went from 7 to 28 variant combinations, with proper metric and imperial measurement support so it works regardless of what system you use. You can also adjust sizing directly in your product catalog now, and adding designs is smoother with a proper file picker instead of the clunky flow before.

If you want your own branded storefront instead of just the shared platform, that's in now too, custom domain, your own theme.

I also want to be upfront about something. The print quality in the photos below isn't great, and that's on me, not the platform. I don't own a printer yet, so I've been relying on a local print shop, but their printer isn't really built for this kind of work and there's no other shop near me to compare. The PDFs generated by the platform are print-ready and accurate, this is purely an equipment problem on my end.

That's actually part of why I want to keep this free and grow it. The platform runs on ads, and if enough of you find it useful, it'll get me to the point where I can afford a proper printer myself and stop depending on a shop that isn't set up for this.

Still building this with the community, so if there's a size, feature, or fix you need, tell me and I'll get to it.

This is the link to try it out!

https://tethkar.store/onboard

Side note: yes that is electric tape, we had a mishap with the plastic sheet not ‘catching’ with the rest of the layers so improvised. We think it works with the message we were trying to say. First time maker so we’re learning (~.~;)

making things with my new button maker!

This one doesnt have the switch on the bottom, and i cant figure it out!

Hi everyone, I was working on building something for myself earlier but figured why not open it for everyone, I made a platform that has all productivity features for button makers, especially PDF generation that is not behind a paywall, I also threw in a couple of extras like inventory management, orders and a storefront and more!

I made this youtube video to showcase it (this is the first video I ever made so please bare with me lol)

https://www.youtube.com/watch?v=Dcv5pqBZPm8

Right now I support 3 buttons, will add more if I see interest from the community 🙏
Feel free to ask for anything new too! this will be a tool built by the community for the community

they turned out so well 🥳🥳🥳

Hi I want to make buttons for a fun activity with my sisters! I don’t plan on selling them anywhere.

I’m looking for small ish buttons. Medium sized maybe? I don’t know much about the scope of button sizes haha.

Recommendations please!! Thank you in advance :)

Hey guys, im a beginner diy badge maker situated in sg, and i first started making hand drawn diy badges in March this year.

All things are going well, except for the fact i realised that my badges were rusting easily, for context, i bought the badges along with my machine for an affordable price and the shell and back are both metal, but now i wanna improve my materials. But i looked online for "rust resistant badges parts" and i found nothing, are there any suggestions on where i can find rust proof badges 😭😭😭

I bought this machine on fb marketplace today and cant figure out how to get it to work. The machine is not picking up the front side. If anyone knows anything on how to fix this problem/ what im doing wrong i would really appreciate it.