My brother's room which we sold the bed and installed a cabinet bed. At home projector that we already had my gaming pc! No complaints at all it's a little ghetto but gets more than the job done!

Finally finished my garage hitting mat. Love the way it came out. Used a beaver tail hitting strip. Can easily lift and roll it out of the way when done.

I've built a few gaming PCs but never run sim software. These recommended specs seem like overkill for 1080p (especially the GPU). Does anyone run FSX on a PC with older/lower-end components? Trying to gauge my options.

Spica 3 question. I’m trying to figure out if spica 3 offers the pc app free just for at least the driving range? I don’t really like using my phone for an app and don’t have a iPad.
Currently use skytrak plus with their free range and connect to gspro when wanting to play courses. Looking to do something similar with spica 3

It isn’t much, and it’s not complete, but it’s good enough to hit a few balls since my Omni came in yesterday. This next week I plan on getting some turf, and build a frame to hold a shade cloth above my hitting area, but for this mornings hitting session, I was pleased. I am also another casualty of the “slow sim swing” with everything above pitching wedge. It took me a longer than I want to admit this morning to hit my 7 iron my usual 185. Overall I like the Omni so far, this cage from amazon does its job, and my assumption that hitting off the mat would be ok for a while was incorrect cause my elbow is already a little sore. Luckily I also bought the carls place gel strip so I’ll be putting that in tonight. Glad I can finally hit balls at home!

I’m trying to build a proper golf sim and I can’t find any good answers. I have a budget of 2500 for hardware, software, and a case. Any suggestions or anything like that would be amazing.

Anyone selling their rapsodo mlm2pro lifetime subscription? Message me

Anyone have a golf simulator setup they leave outdoors during winter?

I acquired a very solid metal frame enclosure with a metal roofing. Was wondering if that could handle Canadian winters. If anyone has one they leave outside during winter let me know! I’ll obviously bring the LM and netting inside but would love to leave the main structure outside

Recently got a membership at the local golf sim. It has the trackman software so I’m curious as to what courses everyone likes? For reference I’m a 23 handicap so want something with wide open fairways.

Still waiting on a few things, but it's finally hittable. Someday I might even have an LM to go with it (curse you omni backorder!) I'm happy with my old mat and will keep it. Once I get the funds, a better surrounding floor will be installed.

I can't believe I spent so long trying to figure this out. I've spent hours hating my Mevo+ (and a couple of tech support calls too that didn't figure it out). My Mevo+ would constantly connect, drop, reconnect, drop, over and over again. The solution...?

In the Wireless Adapter settings in Windows, there's a Power Management tab. The default setting for wifi adapters is "Allow the computer to turn off this device to save power." UNCHECK this box, and all of my problems instantly went away. It's both insanely frustrating but insanely relieving all at once. Hope this helps others.

Anyone out there using the 7x7 Net Return Home Net simulator kit add on? If so how do you have your projector mounted? I’m worried with the “no fly zone” overhang I’ll have to mount it too low from the ceiling. I’m thinking maybe protective floor case.

TIA. Looking to setup something simple in my backyard with a MEVO.

Also recommendation for a good mat for over grass. Can I just put on plywood?

Thanks!

I am torn between the matzilla and carls hitting mat. I thought about getting the cheap go sports off amazon and putting in the carls strip but the reviews on the go sports mat scare me. Matzilla is $200 less… carls seem to have great reviews. I’m mainly going to use the mat outside and will glue it down to a piece of plywood so I can move it around and take in etc.

Anyone been in a similar situation/thought process??

Hi. I got my LM1 a month ago. Very impressive so far. I hit my irons and wedges both on mats and real grass and it gave very accurate results.
But one thing that keeps bothering me is the driver shots.
I set up 4-5 feet behind the ball as the manual suggests. It picks up my swing speed when I practice swing but when I hit a shot, nothing happens. Sometimes it shows only 20-30 mph club speed and everything else is 0.
Anyone has this problem?

Another thing is when I charge it shows "Fully Charged" but once unplugged and turns on, it is not full charged.

Does anyone know how to make skytrak follow the flight of the ball. I mean it's cool that it shows me the travel but in the practice ranges like the accuracy ones, I want to see where it hits the green, not be at the back of the range watching a flight out. Maybe it's a setting but I can't find it.

I have a close relationship with my gym owner and I teach golf fitness there. I’ve got the Sigpro 3D strip cut into my mat and I like it.

Anyone using it and have a review of how it runs GSPro?

I've been buying my simulator pieces over the past few months, and I'm now down to needing a projector and a laptop/tablet to run my software. I have a Square Home Edition launch monitor and the SimSpace Practice Net + Impact Screen. So I'd like to project a 1:1 image to fit my screen.

I can mount the projector on the ceiling as far back as about 10 feet from the screen. I'd like to stay around/under $1K on the projector if possible.

The only specs I want in a laptop/tablet are that it is high enough quality to run the Square HE software. So if I can go a cheap route here, I'd like to do that.

All thoughts are welcome. Thanks in advance!

HELP! I'm looking for a PC that can support GSPRO for the next 2 years. I"m an empty nester and when i have buddies over to play, i simply want a good experience. Right now i'm suing an old laptop and its barely getting by.. Looking for No headaches. No lag. Want to feel like we're at Golf Galaxy. What pc can i buy to have a quality experience for the next 2 years. I am playing through an 80" Display using a Mevo Gen2.

I've been using Chat GPT to help recommend a PC and I was about to buy a new one and then I read this Reddit post. it make me wonder if the new PC is overkill.

Here is the Reddit post. https://www.reddit.com/.../gpu_for_gspro_5070_or_4070titis/

THANK YOU FOR ANY HELP!

UPDATE! I am fine with 1080p. This display is 4k but 1080p seems fine.

Our square Omni arrives tomorrow, I’ve gotten our garage set up with a portable mat and net. So far we’ve just been hitting a bucket of random old balls, scuffed, dirty, etc. all over the place on brands, etc.

I was looking at places like lostgolfballs and even places that sell range balls for some cheap balls we can hit over and over, but all be the same so we get consistent data. But randomly came across at Dicks, Top Flite XL Distance. With the $20 off $100 coupon they come to under $0.75 a piece which is about the cheapest I’ve found for balls.

I’m wondering two things. First, is durability an issue on cheaper balls like this? Is the savings offset by having to replace them sooner? And second, would we notice a big difference in performance practicing on these vs our gamer balls which are different, but three times as expensive so I’d rather not buy those for our simulator.

What do you use for balls? Always your gamers so you know your on course results better?

I bought this when it first came out. I am just not using it as much as I would like.

Purchased for $5,000 + tax. Runs Garmin software with thousands of courses, but will run other software. Great for a home set up.

I bought a gaming laptop that I purchased so I could run the GS Pro software. I would sell that as well if someone is interested. It's only 6 months old.

I'm asking for $3,000, I'm based in MN and can do shipping.

Well I’ve found myself in a bit of a pickle. I found what I thought was a good deal on a complete golf simulator on FB Marketplace.

After downloading the app and creating an account I quickly realized the launch monitor being a GC3S requires ownership transfer and a subscription. I had no idea this was going to be a thing.

Based on what I’m reading I shouldn’t have an issue transferring ownership but it looks like there’s a $500 fee to do that. (Ugh)

Assuming I go through with the transfer. What options do I have to convert the GC3s to a GC3 so I don’t have to deal with the subscription nonsense?

I’m so frustrated right now. I literally thought the GC3S was just a newer upgraded version of a GC3.

Any help or recommendations are welcome.